not able to start ecap with squid

Hi All,

I am new to ecap and squid. I am stuck with starting the squid. I
installed ecap gzip and adapters code configured, make and installed them.
squid 3.1.1
OS ubuntu
ecap_adapter_sample-0.0.2
squid-ecap-gzip-1.2.0
But when I just run the squid with gzip loadable module squid is running.
But for my research I need to make changes to the passthru file. So when I
changed my config file (i.e. squid.conf) as below

ecap_enable on
ecap_service gzip_service respmod_precache 0 ecap://www.vigos.com/ecap_gzip
loadable_modules /usr/local/lib/ecap_adapter_gzip.so
acl GZIP_HTTP_STATUS http_status 200
adaptation_access gzip_service allow GZIP_HTTP_STATUS

ecap_service eReqmod reqmod_precache 0
ecap://e-cap.org/ecap/services/sample/passthru
ecap_service eRespmod respmod_precache 0
ecap://e-cap.org/ecap/services/sample/passthru
loadable_modules /usr/local/lib/ecap_adapter_passthru.so
adaptation_service_set reqFilter eReqmod
adaptation_service_set respFilter eRespmod

adaptation_access respFilter allow all
adaptation_access reqFilter allow all

I am not able to run the icap since I am getting the error "icap protocol
error" that icap is not working. Kindly suggest me how to get through it.
the cache.log is as here:

2010/07/13 12:00:48| Starting Squid Cache version 3.1.1 for
i686-pc-linux-gnu...
2010/07/13 12:00:48| Process ID 1934
2010/07/13 12:00:48| With 1024 file descriptors available
2010/07/13 12:00:48| Initializing IP Cache...
2010/07/13 12:00:48| DNS Socket created at [::], FD 7
2010/07/13 12:00:48| Adding domain unl.edu from /etc/resolv.conf
2010/07/13 12:00:48| Adding domain unl.edu from /etc/resolv.conf
2010/07/13 12:00:48| Adding nameserver 129.93.1.180 from /etc/resolv.conf
2010/07/13 12:00:48| Adding nameserver 129.93.6.189 from /etc/resolv.conf
2010/07/13 12:00:49| Unlinkd pipe opened on FD 12
2010/07/13 12:00:49| Swap maxSize 102400 + 262144 KB, estimated 28041 objects
2010/07/13 12:00:49| Target number of buckets: 1402
2010/07/13 12:00:49| Using 8192 Store buckets
2010/07/13 12:00:49| Max Mem size: 262144 KB
2010/07/13 12:00:49| Max Swap size: 102400 KB
2010/07/13 12:00:49| Version 1 of swap file with LFS support detected...
2010/07/13 12:00:49| Rebuilding storage in
/home/skuttal/libecap-0.0.2/squid-ecap-gzip/squid-3.1.1/var/cache (DIRTY)
2010/07/13 12:00:49| Using Least Load store dir selection
2010/07/13 12:00:49| Set Current Directory to
/home/skuttal/libecap-0.0.2/squid-ecap-gzip/squid-3.1.1/var/cache
2010/07/13 12:00:49| Loaded Icons.
2010/07/13 12:00:49| Adaptation support is on
2010/07/13 12:00:49| Warning: configured ecap_service was not loaded:
ecap://e-cap.org/ecap/services/sample/passthru
2010/07/13 12:00:49| Warning: configured ecap_service was not loaded:
ecap://e-cap.org/ecap/services/sample/passthru
2010/07/13 12:00:49| Ready to serve requests.
2010/07/13 12:00:49| Done reading
/home/skuttal/libecap-0.0.2/squid-ecap-gzip/squid-3.1.1/var/cache swaplog
(2253 entries)
2010/07/13 12:00:49| Finished rebuilding storage from disk.
2010/07/13 12:00:49| 2163 Entries scanned
2010/07/13 12:00:49| 0 Invalid entries.
2010/07/13 12:00:49| 0 With invalid flags.
2010/07/13 12:00:49| 2073 Objects loaded.
2010/07/13 12:00:49| 0 Objects expired.
2010/07/13 12:00:49| 90 Objects cancelled.
2010/07/13 12:00:49| 0 Duplicate URLs purged.
2010/07/13 12:00:49| 0 Swapfile clashes avoided.
2010/07/13 12:00:49| Took 0.24 seconds (8704.34 objects/sec).
2010/07/13 12:00:49| Beginning Validation Procedure
2010/07/13 12:00:49| Completed Validation Procedure
2010/07/13 12:00:49| Validated 4169 Entries
2010/07/13 12:00:49| store_swap_size = 19172
2010/07/13 12:00:50| storeLateRelease: released 0 objects

It seems like ecap_service is not loaded:
ecap://e-cap.org/ecap/services/sample/passthru. how to get over this. Or
is there something else I am missing. Kindly suggest. another thing I
haven't loaded any patches.
Thanks in advance for helping me out.

Thanks
Sandeep

--