Re: squid_kerb_auth build issues with 3.1.0.1 on FreeBSD

Thomas,

can you provide me with the configure line you used plus any CFLAGS,LDFLAGS
you set separately ? I tested with squid 2.x and 3.0 which looked OK.

I will setup a freebsd box and test.

Thank you
Markus

----- Original Message -----
From: "Amos Jeffries" <squid3_at_treenet.co.nz>
To: "Thomas-Martin Seck" <tmseck-lists_at_netcologne.de>
Cc: <squid-dev_at_squid-cache.org>; "Markus Moeller" <huaraz_at_moeller.plus.com>
Sent: Sunday, November 09, 2008 1:55 AM
Subject: Re: squid_kerb_auth build issues with 3.1.0.1 on FreeBSD

> Thomas-Martin Seck wrote:
>> Squid devs,
>>
>> I had a look at 3.1.0.1 today and started to create a FreeBSD port for
>> the 3.1 series.
>>
>> The environments in which I test the port are clean FreeBSD jails
>> running 6.3-RELEASE and 7.0-RELEASE i386 respectively. The directory
>> prefix passed to configure is set to /usr/scratch, CFLAGS are the
>> FreeBSD default of "-O2 -fno-strict-aliasing") and CONFIG_SHELL is
>> /bin/sh. I included aufs and COSS into the build.
>>
>> I ran into the following issues while build-testing:
>>
>> 1) two (probably harmless) bashisms snuck into configure.in, see this
>> patch:
>>
>
> Thanks. Now Fixed. Will be in next daily snapshot and 3.1.0.2 shortly.
>
>
>> 2) squid_kerb_auth does not build on either FreeBSD 6 or 7 (and
>> probably 8-CURRENT):
>
> The kerb issue is more difficult. (cc'ing the author).
> For an initial build the helper can be omitted.
>
> The configure is going to have to change something to get the squid
> portability file 'config.h' included before every system header.
>
>>
>> Making all in negotiate_auth
>> Making all in squid_kerb_auth
>> make all-recursive
>> if
>> c -DHAVE_CONFIG_H -I. -I. -I. -Ispnegohelp -I/usr/include -I/usr/scratch/include
>> -I../../../include -O2 -fno-strict-aliasing -pipe -Wall -Wextra -Werror
>> -Wcomment -Wpointer-arith -Wcast-align -Wwrite-strings -Wstrict-prototypes
>> -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement
>> -Wshadow -MT squid_kerb_auth.o -MD -MP -MF
>> ".deps/squid_kerb_auth.Tpo" -c -o squid_kerb_auth.o squid_kerb_auth.c;
>> then mv -f ".deps/squid_kerb_auth.Tpo" ".deps/squid_kerb_auth.Po"; else
>> rm -f ".deps/squid_kerb_auth.Tpo"; exit 1; fi
>> In file included from ../../../include/getaddrinfo.h:21,
>> from squid_kerb_auth.c:65:
>> ../../../include/config.h:196:1: "FD_SETSIZE" redefined
>> In file included from /usr/include/sys/types.h:299,
>> from /usr/include/unistd.h:41,
>> from squid_kerb_auth.c:36:
>> /usr/include/sys/select.h:59:1: this is the location of the previous
>> definition
>> squid_kerb_auth.c:121:20: base64.h: No such file or directory
>> squid_kerb_auth.c:123:24: spnegohelp.h: No such file or directory
>> squid_kerb_auth.c: In function `main':
>> squid_kerb_auth.c:424: warning: implicit declaration of function
>> `ska_base64_decode_len'
>> squid_kerb_auth.c:429: warning: implicit declaration of function
>> `ska_base64_decode'
>> squid_kerb_auth.c:433: warning: implicit declaration of function
>> `parseNegTokenInit'
>> squid_kerb_auth.c:512: warning: implicit declaration of function
>> `makeNegTokenTarg'
>> squid_kerb_auth.c:529: warning: implicit declaration of function
>> `ska_base64_encode_len'
>> squid_kerb_auth.c:537: warning: implicit declaration of function
>> `ska_base64_encode'
>> *** Error code 1
>>
>> On FreeBSD 6, helpers/negotiate_auth/squid_kerb_auth/config.h looks
>> like the following, on FreeBSD 7 the only difference is that
>> HAVE_GSSAPI_GSSAPI_KRB5_H is (correctly) defined:
>>
>> /* config.h. Generated from config.h.in by configure. */
>> /* config.h.in. Generated from configure.in by autoheader. */
>>
>> /*
>> * -----------------------------------------------------------------------------
>> *
>> * Author: Markus Moeller (markus_moeller_at_compuserve.com)
>> *
>> * Copyright (C) 2007 Markus Moeller. All rights reserved.
>> *
> <snip>
>>
>>
>> #ifdef HAVE_HEIMDAL_KERBEROS
>> #ifdef HAVE_GSSAPI_GSSAPI_H
>> #include <gssapi/gssapi.h>
>> #elif defined(HAVE_GSSAPI_H)
>> #include <gssapi.h>
>> #endif
>> #define gss_nt_service_name GSS_C_NT_HOSTBASED_SERVICE
>> #else
>> #ifdef HAVE_SEAM_KERBEROS
>> #ifdef HAVE_GSSAPI_GSSAPI_H
>> #include <gssapi/gssapi.h>
>> #elif defined(HAVE_GSSAPI_H)
>> #include <gssapi.h>
>> #endif
>> #ifdef HAVE_GSSAPI_GSSAPI_EXT_H
>> #include <gssapi/gssapi_ext.h>
>> #endif
>> #define gss_nt_service_name GSS_C_NT_HOSTBASED_SERVICE
>> #else /*MIT*/
>> #ifdef HAVE_GSSAPI_GSSAPI_H
>> #include <gssapi/gssapi.h>
>> #elif defined(HAVE_GSSAPI_H)
>> #include <gssapi.h>
>> #endif
>> #ifdef HAVE_GSSAPI_GSSAPI_KRB5_H
>> #include <gssapi/gssapi_krb5.h>
>> #endif
>> #ifdef HAVE_GSSAPI_GSSAPI_GENERIC_H
>> #include <gssapi/gssapi_generic.h>
>> #endif
>> #endif
>> #endif
>>
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE5 or 3.0.STABLE10
> Current Beta Squid 3.1.0.1
>
Received on Sun Nov 09 2008 - 15:02:53 MST